New To The Forum? Click Here To Read The How To Guide. -- Developers Click Here.

Oculus TrayTool - SuperSampling profiles, HMD disconnect fixes (hopefully)

13468941

Comments

  • xeno3dxeno3d Posts: 28
    Brain Burst
    Is SS adjusting on the fly or do I need to restart Oculus Home and or Steam VR after making changes
  • ApollyonVRApollyonVR Posts: 274
    Nexus 6
    In the current version "super sampling on start" is applied when the tool starts. I have changed that in 0.66.1 which i will post in a few days. But you can use voice commands to change ss "on the fly" so to speak. You do need to restart any running game, or set the new ss before you start the game. You do not need to restart home/steam vr, unless you want those applications to also use the new ss value. Home is after all a vr application in itself. :-)
  • KillconeKillcone Posts: 4
    NerveGear
    Hi I have just downloaded the awesome Traytool but when I try to start it I only get "Oculus tray tool starting up please wait" in the lower corner of my desktop. When the tray tool screen opens my mouse icon is just a blue rotating ring. (I'm on Windows 10) You can check and uncheck settings in the application but it won't save them and I see no noticeable difference inside my rift. If I check the system tray the the Tray icon always has "Starting up..." written on it. How can I get it runing correctly? Please help because I love my Rift and this application looks so promising!


  • dburnedburne Posts: 1,500
    Project 2501
    Killcone said:
    Hi I have just downloaded the awesome Traytool but when I try to start it I only get "Oculus tray tool starting up please wait" in the lower corner of my desktop.

    Do you have it set to run as administrator? You need to run as administrator.
    Don

    EVGA X-79 Dark MB|I7 [email protected] GHz|EVGA 1080Ti FTW3 Elite|16GB Corsair Platinum 2133MHz| TM Warthog + 7.5cm Ext| MFG Crosswind Pedals| Rift CV1|Windows 10 64 bit 
  • KillconeKillcone Posts: 4
    NerveGear
    Yeah I set the .exe file to run as administartor with the same result.
  • ApollyonVRApollyonVR Posts: 274
    Nexus 6
    @Killcone PM/email me the ott.log file from the installation folder and i'll have a peek.
  • rcjc1984rcjc1984 Posts: 2
    NerveGear
    @ApollyonVRim getting the exact same problem

  • ThotThot Posts: 87
    Hiro Protagonist
    disabling asw don't work with onward, as oculus tray tools :(
  • rcjc1984rcjc1984 Posts: 2
    NerveGear
    @ApollyonVR sorted wasd problem with usb needed resart thanks
  • xtreemchaosxtreemchaos Posts: 14
    NerveGear
    great work mate can you pm me a download link please
  • lordshadowfaxlordshadowfax Posts: 3
    NerveGear
    I like this tool! Thank you!

    I have 2 suggestions tho:
    1. Enable keyboard shortcut to cycle between different Visual HUD options while with VR headset on
    2. Move the Visual HUD display from the centre or provide options to put it at top/bottom/side/corner
  • Speedxx007Speedxx007 Posts: 1
    NerveGear
    getting the exact same problem
    7-3-2017 19:27:32 Starting up...
    7-3-2017 19:27:32 Reading configuration from C:\Oculus Tray Tool\config.xml
    7-3-2017 19:27:32 Reading profiles
    7-3-2017 19:27:33 No Fresco Logic settings found in registry, probably not installed
    7-3-2017 19:27:33 Current Power Plan is Hoge prestaties
    7-3-2017 19:27:33 Hoge prestaties has USB Selective Suspend Enabled
    7-3-2017 19:27:34 System.TypeInitializationException: De type-initialisatiefunctie voor OculusTrayTool.voiceCommands heeft een uitzondering veroorzaakt. ---> System.PlatformNotSupportedException: Er is geen herkenner geïnstalleerd.
       bij System.Speech.Recognition.RecognizerBase.Initialize(SapiRecognizer recognizer, Boolean inproc)
       bij System.Speech.Recognition.SpeechRecognitionEngine.get_RecoBase()
       bij System.Speech.Recognition.SpeechRecognitionEngine.get_RecognizerInfo()
       bij OculusTrayTool.voiceCommands..cctor()
       --- Einde van intern uitzonderingsstackpad ---
       bij OculusTrayTool.voiceCommands.GetRecognizers()
       bij OculusTrayTool.FrmMain.Form1_Load(Object sender, EventArgs e)   bij OculusTrayTool.voiceCommands.GetRecognizers()
       bij OculusTrayTool.FrmMain.Form1_Load(Object sender, EventArgs e)
    7-3-2017 19:27:58 Stopping OVR Service...
    7-3-2017 19:27:59 OVR Service is down
    7-3-2017 19:28:08 Starting OVR Service...
    7-3-2017 19:28:20 Stopping OVR Service...
    7-3-2017 19:28:21 OVR Service is down
    7-3-2017 19:28:47 Starting OVR Service...
    7-3-2017 19:29:01 Stopping OVR Service...
    7-3-2017 19:29:02 OVR Service is down
    7-3-2017 19:29:05 Closing down...
    7-3-2017 19:29:10 Starting up...
    7-3-2017 19:29:10 Reading configuration from C:\Oculus Tray Tool\config.xml
    7-3-2017 19:29:10 Reading profiles
    7-3-2017 19:29:10 No Fresco Logic settings found in registry, probably not installed
    7-3-2017 19:29:10 Current Power Plan is Hoge prestaties
    7-3-2017 19:29:10 Hoge prestaties has USB Selective Suspend Enabled
    7-3-2017 19:29:11 System.TypeInitializationException: De type-initialisatiefunctie voor OculusTrayTool.voiceCommands heeft een uitzondering veroorzaakt. ---> System.PlatformNotSupportedException: Er is geen herkenner geïnstalleerd.
       bij System.Speech.Recognition.RecognizerBase.Initialize(SapiRecognizer recognizer, Boolean inproc)
       bij System.Speech.Recognition.SpeechRecognitionEngine.get_RecoBase()
       bij System.Speech.Recognition.SpeechRecognitionEngine.get_RecognizerInfo()
       bij OculusTrayTool.voiceCommands..cctor()
       --- Einde van intern uitzonderingsstackpad ---
       bij OculusTrayTool.voiceCommands.GetRecognizers()
       bij OculusTrayTool.FrmMain.Form1_Load(Object sender, EventArgs e)   bij OculusTrayTool.voiceCommands.GetRecognizers()
       bij OculusTrayTool.FrmMain.Form1_Load(Object sender, EventArgs e)
    7-3-2017 19:30:04 Starting OVR Service...
    7-3-2017 19:31:28 Stopping OVR Service...
    7-3-2017 19:31:29 OVR Service is down
    7-3-2017 19:32:57 Closing down...
    7-3-2017 19:33:15 Starting up...
    7-3-2017 19:33:15 Reading configuration from C:\Oculus Tray Tool\config.xml
    7-3-2017 19:33:15 Reading profiles
    7-3-2017 19:33:15 No Fresco Logic settings found in registry, probably not installed
    7-3-2017 19:33:15 Current Power Plan is Hoge prestaties
    7-3-2017 19:33:15 Hoge prestaties has USB Selective Suspend Enabled
    7-3-2017 19:33:15 System.TypeInitializationException: De type-initialisatiefunctie voor OculusTrayTool.voiceCommands heeft een uitzondering veroorzaakt. ---> System.PlatformNotSupportedException: Er is geen herkenner geïnstalleerd.
       bij System.Speech.Recognition.RecognizerBase.Initialize(SapiRecognizer recognizer, Boolean inproc)
       bij System.Speech.Recognition.SpeechRecognitionEngine.get_RecoBase()
       bij System.Speech.Recognition.SpeechRecognitionEngine.get_RecognizerInfo()
       bij OculusTrayTool.voiceCommands..cctor()
       --- Einde van intern uitzonderingsstackpad ---
       bij OculusTrayTool.voiceCommands.GetRecognizers()
       bij OculusTrayTool.FrmMain.Form1_Load(Object sender, EventArgs e)   bij OculusTrayTool.voiceCommands.GetRecognizers()
       bij OculusTrayTool.FrmMain.Form1_Load(Object sender, EventArgs e)
    7-3-2017 19:37:52 Stopping OVR Service...
    7-3-2017 19:39:02 Closing down...
    7-3-2017 19:39:13 Starting up...
    7-3-2017 19:39:13 Reading configuration from C:\Oculus Tray Tool\config.xml
    7-3-2017 19:39:13 Reading profiles
    7-3-2017 19:39:13 No Fresco Logic settings found in registry, probably not installed
    7-3-2017 19:39:13 Current Power Plan is Hoge prestaties
    7-3-2017 19:39:13 Hoge prestaties has USB Selective Suspend Enabled
    7-3-2017 19:39:14 System.TypeInitializationException: De type-initialisatiefunctie voor OculusTrayTool.voiceCommands heeft een uitzondering veroorzaakt. ---> System.PlatformNotSupportedException: Er is geen herkenner geïnstalleerd.
       bij System.Speech.Recognition.RecognizerBase.Initialize(SapiRecognizer recognizer, Boolean inproc)
       bij System.Speech.Recognition.SpeechRecognitionEngine.get_RecoBase()
       bij System.Speech.Recognition.SpeechRecognitionEngine.get_RecognizerInfo()
       bij OculusTrayTool.voiceCommands..cctor()
       --- Einde van intern uitzonderingsstackpad ---
       bij OculusTrayTool.voiceCommands.GetRecognizers()
       bij OculusTrayTool.FrmMain.Form1_Load(Object sender, EventArgs e)   bij OculusTrayTool.voiceCommands.GetRecognizers()
       bij OculusTrayTool.FrmMain.Form1_Load(Object sender, EventArgs e)
    7-3-2017 19:39:49 Closing down...
    7-3-2017 19:40:14 Starting up...
    7-3-2017 19:40:14 Reading configuration from C:\Oculus Tray Tool\config.xml
    7-3-2017 19:40:14 Reading profiles
    7-3-2017 19:40:15 No Fresco Logic settings found in registry, probably not installed
    7-3-2017 19:40:15 Current Power Plan is Hoge prestaties
    7-3-2017 19:40:15 Hoge prestaties has USB Selective Suspend Enabled
    7-3-2017 19:40:15 System.TypeInitializationException: De type-initialisatiefunctie voor OculusTrayTool.voiceCommands heeft een uitzondering veroorzaakt. ---> System.PlatformNotSupportedException: Er is geen herkenner geïnstalleerd.
       bij System.Speech.Recognition.RecognizerBase.Initialize(SapiRecognizer recognizer, Boolean inproc)
       bij System.Speech.Recognition.SpeechRecognitionEngine.get_RecoBase()
       bij System.Speech.Recognition.SpeechRecognitionEngine.get_RecognizerInfo()
       bij OculusTrayTool.voiceCommands..cctor()
       --- Einde van intern uitzonderingsstackpad ---
       bij OculusTrayTool.voiceCommands.GetRecognizers()
       bij OculusTrayTool.FrmMain.Form1_Load(Object sender, EventArgs e)   bij OculusTrayTool.voiceCommands.GetRecognizers()
       bij OculusTrayTool.FrmMain.Form1_Load(Object sender, EventArgs e)
    7-3-2017 19:40:22 Closing down...
    7-3-2017 19:40:35 Starting up...
    7-3-2017 19:40:35 Reading configuration from C:\Oculus Tray Tool\config.xml
    7-3-2017 19:40:35 Reading profiles
    7-3-2017 19:40:35 No Fresco Logic settings found in registry, probably not installed
    7-3-2017 19:40:35 Current Power Plan is Hoge prestaties
    7-3-2017 19:40:35 Hoge prestaties has USB Selective Suspend Enabled
    7-3-2017 19:40:35 System.TypeInitializationException: De type-initialisatiefunctie voor OculusTrayTool.voiceCommands heeft een uitzondering veroorzaakt. ---> System.PlatformNotSupportedException: Er is geen herkenner geïnstalleerd.
       bij System.Speech.Recognition.RecognizerBase.Initialize(SapiRecognizer recognizer, Boolean inproc)
       bij System.Speech.Recognition.SpeechRecognitionEngine.get_RecoBase()
       bij System.Speech.Recognition.SpeechRecognitionEngine.get_RecognizerInfo()
       bij OculusTrayTool.voiceCommands..cctor()
       --- Einde van intern uitzonderingsstackpad ---
       bij OculusTrayTool.voiceCommands.GetRecognizers()
       bij OculusTrayTool.FrmMain.Form1_Load(Object sender, EventArgs e)   bij OculusTrayTool.voiceCommands.GetRecognizers()
       bij OculusTrayTool.FrmMain.Form1_Load(Object sender, EventArgs e)
    7-3-2017 19:40:46 Stopping OVR Service...
    7-3-2017 19:40:53 Starting OVR Service...
    7-3-2017 19:40:53 Stopping OVR Service...
    7-3-2017 19:40:57 OVR Service is down
    7-3-2017 19:42:12 Closing down...
    7-3-2017 19:42:17 Starting up...
    7-3-2017 19:42:18 Reading configuration from C:\Oculus Tray Tool\config.xml
    7-3-2017 19:42:18 Reading profiles
    7-3-2017 19:42:18 No Fresco Logic settings found in registry, probably not installed
    7-3-2017 19:42:18 Current Power Plan is Hoge prestaties
    7-3-2017 19:42:18 Hoge prestaties has USB Selective Suspend Enabled
    7-3-2017 19:42:18 System.TypeInitializationException: De type-initialisatiefunctie voor OculusTrayTool.voiceCommands heeft een uitzondering veroorzaakt. ---> System.PlatformNotSupportedException: Er is geen herkenner geïnstalleerd.
       bij System.Speech.Recognition.RecognizerBase.Initialize(SapiRecognizer recognizer, Boolean inproc)
       bij System.Speech.Recognition.SpeechRecognitionEngine.get_RecoBase()
       bij System.Speech.Recognition.SpeechRecognitionEngine.get_RecognizerInfo()
       bij OculusTrayTool.voiceCommands..cctor()
       --- Einde van intern uitzonderingsstackpad ---
       bij OculusTrayTool.voiceCommands.GetRecognizers()
       bij OculusTrayTool.FrmMain.Form1_Load(Object sender, EventArgs e)   bij OculusTrayTool.voiceCommands.GetRecognizers()
       bij OculusTrayTool.FrmMain.Form1_Load(Object sender, EventArgs e)
    7-3-2017 19:42:22 Stopping OVR Service...
    7-3-2017 19:42:24 Starting OVR Service...
    7-3-2017 19:42:27 Stopping OVR Service...
    7-3-2017 19:42:30 OVR Service is down
  • ApollyonVRApollyonVR Posts: 274
    Nexus 6
    @Speedxx007 Looks like you don't have any voice engines installed, or perhaps running and older Windows 7 build? I'll PM you a new version that contains checks for this and should proceed with the startup but disable voice commands. Also, check if you have .NET 4.5.2 installed and if not, install it from https://www.microsoft.com/en-us/download/details.aspx?id=42642&e6b34bbe-475b-1abd-2c51-b5034bcdd6d2=True and see if that makes any difference.

  • xeno3dxeno3d Posts: 28
    Brain Burst
    Where can I donate?
  • YoLolo69YoLolo69 Posts: 975
    3Jane
    @cybereality : Just a suggestion : could be great to set this thread as sticky, replacing the now useless "1.11 Post your logs here" ;)

    “Dreams feel real while we are in them, it's only when we wake up that we realize something was strange.” - Dom Cobb

    "Be careful, if you are killed in real life you die in VR too." - TD_4242

  • korgen63korgen63 Posts: 59
    Hiro Protagonist
    That would be great!
  • KillconeKillcone Posts: 4
    NerveGear
    @ApollyonVR I'm on Windows 10 and still have the same problem as Speedxx007 who is runing Windows 7. Is there something wrong with my NET framework also?
  • ApollyonVRApollyonVR Posts: 274
    Nexus 6
    @KillCore I haven't heard back from Speed yet so not sure if it solved his problem. I need to take a look at the ott.log and see if i can find the problem, so send it to me and i'll have a look. Also, you can try and reset some of the settings by deleting the "C:\Users\<YOUR_USERNAME>\AppData\Local\ApollyonVR" folder and see if that helps.

    Cheers!

  • ZeroOneStudioZeroOneStudio Posts: 2
    NerveGear
    Hi, I'm having the same issue as Killcone on Windows 10 x64.  Have tried deleting the directory as suggested but no luck.  Will PM you the log.

    If I kill the process a couple of times it does finally start up but doesn't affect the games in any way.

    Thanks!
    Brad
  • TurraniusTurranius Posts: 25
    Brain Burst
    Works fine for me, thanks. But it seems to reset the windows Text to Speech back to default every time it starts.
    I set, for example, Cepstral David, which is my default and start OculusTrayTool.exe as administrator. A few seconds later, it sets the default voice to Microsoft Hazel Desktop (Which is at the top of the list).

  • ApollyonVRApollyonVR Posts: 274
    Nexus 6
    If no voice is set in the tool it will default to the first in the list. If the voice you want is available in the list, then set it there and it should be set on start. If it's not available i probably made a misstake somewhere. :-)
  • TurraniusTurranius Posts: 25
    Brain Burst
    Ok. Worth noting is that Cepstral David is a 32bit voice. It does not appear if I launch the normal Text To Speech interface from the control panel as it only lists 64 bit voices. I have to launch the "C:\Windows\SysWOW64\Speech\SpeechUX\sapi.cpl" apps to see it and set it as default.

    So your tool probably goes "No default set" and sets one, even though there is a 32bit voice set as default.

  • TurraniusTurranius Posts: 25
    Brain Burst
    edited March 2017
    Is there no way to turn that off by the way? I don't want it messing with voices, just set super sampling to 1.8 by normal and 1.5 when running Elite Dangerous (which works fine. Just just have to change back the default voice each time).

    Voice commands is Disabled in your Tray Tool, so perhaps skip all that if its disabled as it gets confused now I guess. Cepstral David does not show up in Voice Commands / Edit either.
  • ApollyonVRApollyonVR Posts: 274
    Nexus 6
    There is no option to turn of voice callback in the current version. But i'll build some option to handle that in next version. Will PM you with a beta to test when i have something built. 
  • elbofforelboffor Posts: 2,565 Valuable Player
    just wondering, did this tool fix the hdmi disconnects then?
    if so, shouldnt you change the thread title?
    This is my forum signature.
    There are many others like it, but this is mine.
  • TurraniusTurranius Posts: 25
    Brain Burst
    There is no option to turn of voice callback in the current version. But i'll build some option to handle that in next version. Will PM you with a beta to test when i have something built. 
    Appreciate it. Thanks again for this awesome tool =)
  • e_m_d88e_m_d88 Posts: 372
    Trinity
    @cybereality ; Is it possible to make this thread a sticky by chance.  Since this is a great tool.  I think users should be able to find this thread easier.   
    ASUS Sabertooth Z170 S, i5 6600K. 16 gigs ram DDR-4 3000 MHZ. SSD Samsung 850 Pro 256 gigs. WD Caviar Black 1 TB. Windows 10 PRO 64-bit. Gigabyte GTX 1080 G1, Acer Predator XG270HU [email protected] hz, Phanteks Enthoo Pro case. EVGA Supernova 750 G2 PSU. Inatech 4 port USB 3.0.  Rift + Touch.
  • dburnedburne Posts: 1,500
    Project 2501
    Hey ApollonVR,

    Is the disable ASW working properly? Or may be I am not understanding it correctly...
    I thought I would give my combat flight sim a try and see how it did with it disabled, but it appears it is still enabled - ie I get either 90 fps or 45 fps. I thought with it disabled my fps would vary more in between or am I not understanding that right?

    I tried both setting on the main screen, and then chose to disable ASW on Home start and got the same result each time.

    Thanks for any tips,
    Don

    EVGA X-79 Dark MB|I7 [email protected] GHz|EVGA 1080Ti FTW3 Elite|16GB Corsair Platinum 2133MHz| TM Warthog + 7.5cm Ext| MFG Crosswind Pedals| Rift CV1|Windows 10 64 bit 
  • ApollyonVRApollyonVR Posts: 274
    Nexus 6
    @dburne Yes, that's the way it works. You can use the "ASW Status" visual hud overlay to see ASW Status. Bring that up using either the dropdown (click on "More >>" to see it) or use voice commands ("show spacewarp"). Then change ASW to Auto or Off using either the "ASW Mode" dropdown or voice commands, and you should see it change status. If framerates drop too much (i'm guessing around 60-70-ish) ASW will kick in regardless (not much to do about that). So first test in Oculus Home to see that the ASW functionality of OTT works. If so, then my guess is that framerates are dropping too low for that particular game. If not, let me know and we'll have a look at it.
  • dburnedburne Posts: 1,500
    Project 2501
    If framerates drop too much (i'm guessing around 60-70-ish) ASW will kick in regardless (not much to do about that).
    Ok that is probably it then, thanks much. I will double check in Home to be sure.
    Don

    EVGA X-79 Dark MB|I7 [email protected] GHz|EVGA 1080Ti FTW3 Elite|16GB Corsair Platinum 2133MHz| TM Warthog + 7.5cm Ext| MFG Crosswind Pedals| Rift CV1|Windows 10 64 bit 
13468941
Sign In or Register to comment.