Help. Runtime DK2 where?

Comments

• Stelzer Posts: 119

  April 2016 edited April 2016

  Http://oculus.com/setup
  
  Skip the headset setup.

  2
• koolwaad Posts: 11

  April 2016

  And... good luck .... 

  1
• Ultimato Posts: 2

  NerveGear

  April 2016

  Thanks for the installer but it a lot trickier then the old one.... I think i realy Need a lot of luck...

  0
• sanderbos Posts: 94

  Hiro Protagonist

  April 2016

  Do you mean like the old now obsolte runtimes? If you select stuff from the dropdowns you can get e.g. 0.8 from
  https://developer.oculus.com/downloads/
  
  But should at least *try* to install 1.3 with the 'regular' Oculus Home installer since it's so much better and so much fun, if you can get it work (and didn't they roll back 1.3.1? I am not sure, I am still on 1.3.0 and everything still works, fingers crossed it stays that way). If you do attempt a 1.3 install (so regular install) of Oculus Home with DK2 just be patient, and verify yourself whether things are working or not (so if the setup software complains but you see blue leds and the screen in the Rift is on, it is working and you can skip steps).

  0
• pvictor0313 Posts: 4

  April 2016

  I have run the setup and have Oculus home running. The DK2 headset works fine but my DK2 rift camera doesn't seem to be working. It doesn't track down my head movement at all. Does anyone else have the same issue?

  0
• Cyph3r Posts: 79

  Brain Burst

  April 2016

  I have run the setup and Oculus Home is working perfectly with my DK2 headset, the camera is also working perfectly.

  DK1 - Ordered 27/09/13. 080xxx - ARRIVED 11th November 2013
  DK2 - Ordered 19/03/14. AO-104xxxx - ARRIVED 29th July 2014
  
  Intel Core i7 4710MQ @ 3.5Ghz | Nvidia GTX970M 3GB | Kingston HyperX 16Gb 1600Mhz | Samsung 850 Evo 1TB

  0
• pvictor0313 Posts: 4

  April 2016

  Thanks Cyph3r, does the blue light on your DK2 camera stay on? Are you using USB 2.0 or 3.0 for it?

  0
• Cyph3r Posts: 79

  Brain Burst

  April 2016

  pvictor0313 said:

  Thanks Cyph3r, does the blue light on your DK2 camera stay on? Are you using USB 2.0 or 3.0 for it?

  The blue light on the camera only comes on if the headset is on, if I press the power button on the headset to turn it off, the camera also goes off. And then it will come back on when I turn the headset on.
  
  I'm using a USB 3.0 port but its being reported by Oculus Home that it's on a USB 2.0 port for some reason.

  DK1 - Ordered 27/09/13. 080xxx - ARRIVED 11th November 2013
  DK2 - Ordered 19/03/14. AO-104xxxx - ARRIVED 29th July 2014
  
  Intel Core i7 4710MQ @ 3.5Ghz | Nvidia GTX970M 3GB | Kingston HyperX 16Gb 1600Mhz | Samsung 850 Evo 1TB

  0