cancel
Showing results for 
Search instead for 
Did you mean: 

Medium Frequently Asked Questions

MattHickman
Rising Star
Hi all, we've compiled a few frequently asked questions for recent and new users. We'll keep this updated as we continue to grow and support Medium! 

Q: I tried to queue some assets for download from the Oculus.com/Medium sharing site but now Medium crashes immediately on launch.

A: We've noticed that some antivirus and malware softwares, particularly Ad-Aware Web Companion and Free Antivirus have been identifying Medium files coming from the sharing site as untrusted or as malicious. We're working to get this issue resolved but in the meantime uninstalling in the case of Web Companion or disabling in the case of Free Antivirus will resolve this issue and allow you to download assets from the sharing site. 

Q: I'm seeing weird graphical behavior on my AMD video card, what do I do?!

A: Verify that you have the latest AMD driver by right-clicking on your
desktop, going to AMD Radeon Settings, and looking at the
system/overview tab. You should be on version 16.11.5. I have seen
driver updates look like the complete but not actually update the driver
correctly. This location in the settings has been a reliable place to
check for me. Also, when doing driver updates I tend to uninstall the
driver, reboot, install the driver, and reboot again.

If you are on the latest AMD drivers and are still experiencing trouble make sure that your monitor is plugged into the same video card that your Rift is. We've seen issues with having a monitor plugged into the on board video while the Rift is on a separate card.

Q: When I’m painting or sculpting, sometimes the surface looks jagged or pixelated. How do I make it smoother and sharper?

A: By increasing the resolution of the layer you’re working on, you can increase detail and precision. To do this, pull back on the support hand thumbstick, select the layer you would like to increase resolution on, then select the desired resolution. After a brief processing period, your layer will now appear at a higher resolution and allow finer details for both sculpting and painting.


Q: I tried to increase the resolution on my layer and part of my sculpt got cut off or disappeared. What happened?

A: When the resolution increases, the bounding box of the layer scales down; anything outside of the bounding box when it scales will be cut off. To resolve this issue, undo the resolution increase operation and choose “Center” before once again increasing the resolution.


Q: What’s the little triangle on my tool tray? Why does my tool switch when I pull the support hand trigger?

A: This is your Alt tool—think of it like a shortcut to switch from one tool to another with a click of the trigger. Your default Alt tool is Smooth. If you’re sculpting clay and want to quickly smooth out an edge, press and hold the front trigger on the support controller to switch to the Smooth tool. The primary controller’s functions will work as expected—thumbstick for size and color wheel, front trigger for use—as long as the support controller’s trigger is held down. To choose another Alt tool, hover over the desired tool with your primary hand and press the support controller’s front trigger. The triangle will move to indicate your selection.


Q: When I try to upload assets to the sharing site and take my HMD off to change the settings, the upload fails. How do I fix this problem?

A: Your HMD must remain on during the upload. Make sure the HMD remains active until you receive the upload complete notification.


Q: Can I convert my recording into another video format?

A: Recordings aren’t actually a video. They are a special VR-only format for use in Oculus Medium. We will be adding video export support in a later update.


Q: Can I import my own OBJ/FBX files into Medium to work with?

A: Yes! You can import OBJ and FBX files as either stamps or reference meshes. Once they're in as reference meshes you can then select them and choose the "convert to clay" option which will convert them to the Medium file format and you'll be able to work on them however you'd like!


Q: Are there limitations to what I can import as a stamp?

A: You can import any OBJ or FBX; however, you should be aware that stamps are at a lower resolution than the sculpts as they are meant to be used as tools. In addition, any OBJs intended for import need to be closed or else they will not behave properly once they are brought into Medium.


Q: What exactly does the Export button in the home menu do?

A: The Export button exports a high-resolution version of your sculpt. To be very specific, you now get two .obj files. Let's say your Sculpt is called "fork". You'll have a "fork.obj", which is the high-res version, and a "fork_preview.obj", which is low-res.


Q: Is there a poly limit on performance? Is there a way to check or monitor performance when I have multiple layers?

A: We currently don't have a built-in way to show you the performance or memory footprint. For best performance, a good NVIDIA GPU will do the trick (a GTX 1080 is excellent). Our optimization work for Medium is ongoing. We currently have a 20-layer limit; when you get close to running out of physical memory (layers or otherwise), you’ll receive a pop-up warning. If you continue to use more memory after that, Windows will start swapping memory pages back and forth from disk, which will negatively impact performance.


Q: Does performance increase if I split a complicated model into separate layers?

A: No. The number of layers does not affect performance. We did a lot of work to ensure that performance is dependent upon the total amount of polygons you’re rendering across all layers. If you split up the sculpt so that one layer is high-resolution while the others are low-resolution, you can manage the total number of polygons to increase performance overall.

Q: How many levels of resolution are there?

A: This depends on how much physical memory you have available on your system—we let you increase the resolution of a layer as many times as your machine can handle (Medium 1.0, 32 GB of RAM or better will help a lot). We’re working on memory usage improvements, which will be rolled out in future releases.


Q: Sometimes when I use the Cut tool, it makes a failure sound and doesn’t cut. What’s going on?

A: The Cut tool has to completely sever whatever you’re trying to cut, so when you’re making cuts, make sure the blue line from the tool passes all the way through solid material.


Q: Are there any shortcuts so I can switch tools or perform operations more quickly?

A: Yes, there are a few! With most tools you can double tap the Gear icon on your tool hand to toggle functionality. i.e.
-Add/Erase with the sculpt tool, Inflate/Deflate with the inflate tool, etc. 
-Double tapping the color wheel while using the Clay or Paint tool will bring up the eye dropper color picker.
-Open the layer menu on your support hand and select the icons at the bottom of the menu to quickly toggle the symmetry plane and the lathe on and off.

Q: How do I use the metal and emissive materials?

A:  To change a layer to a different material open your layer menu by pull back on the support hand thumbstick and select the layer you would like to edit. While still holding back the thumbstick press the gear icon on your tool hand. At the top you will notice a tab labeled "Material". In this tab you can set that layer's material and edit its properties.  

Q: I'm receiving an OpenGL high error 1282, what do I do?

A: Apps like Afterburner, Gigabyte Guru, Riva Tuner, etc. that render overlays to the screen use older versions of OpenGL that are incompatible with Medium. We recommend you close them while running Medium.

Q: I uploaded my sculpt but the preview image is blank or poorly framed.

A: Check your sculpt for empty layers, if you have any, delete them, then try sharing again.
90 REPLIES 90

P3nT4gR4m
Consultant

XlordB said:


P3nT4gR4m said:

When you make a new layer, holding down layers menu stick will show a turquoise wireframe globe. This marks the center of the layer volume and is a good place to start sculpting. It disappears as soon as you lay down some clay.


actually what would be nice with this is if you happen to want to redo the initial clay you put down that the marker would re- appear when no clay is down. or at least just remain appeared when you pull the layer menu up. 



In my wildest fantasies it's always there but it's a full-blown transform gizmo and I can spin in place and move and scale along axes... Then I wake up, soaking with sweat and weeping softly into my pillow 😞

Roaster
Rising Star
"How do I fix layers that have had this happen to them? How does the layer get to this state?"

This problem is caused by having layers at different resolutions. Imagine a first layer at resolution plus 2 that is 3/4 the size of the box. Adding a second layer at resolution plus 3 causes the original layer to appear larger, as if it also has res +3. If you select layer one again, it goes back to normal size, and selecting layer 2 causes it to look bigger, perhaps with parts cut off.
At least that's how I think it works. In one case the original layer was cut off and did not restore the missing parts when selected. Trying to combine layers of different resolutions will mess things up bad.
A resolution change is a change of scale, not something like ppi.
i7-5820K @ 4.2Ghz, water cooled, Asus X99-Pro USB 3.1, 48 Gb DDR4 2400, Samsung 950 pro M.2 SSD, GTX 980 Ti SC, 750w psu

scottbretonarti
Explorer
Medium is the primary reason I invested in a new computer and the oculus, and I am not disappointed.  There are extra features to be added to be sure, and it took a while to get any amount of subtlety (probably a place to refine developers - pressure sensitivity :smile:  ) but overall this is exactly what I was hoping for.  I come from a traditional sculpting background, have learned basic zbrush sculpting to expand my freedom , but compared to 2d digital this allows so much eye/ hand/ body integration that I was looking for.  On its own, the ability to draw/pull arcs of form out into space to map in the overall form is a complete game changer IMO, something that is difficult or impossible in either traditional or 2d digital apps.  Thank you medium!  

Artist3d
Explorer
I was using the program to build a 3D version of 2D painting I did and
brought in a reference image to work from. Now that I have completed my
sculpture how do I get rid of the reference image that is floating
there? Thanks to anyone who knows. I thought of deleting it from the
media folder however that seems like it might create an error when I try
to reload my sculpture.

I think the In Medium program is ground-breaking both for Oculus VR and artists. It is offers a truly signature tool unique to the Oculus Rift virtual reality world  Anyone looking to build models that are more organic looking and natural, particularly for fantasy landscapes and objects must be as thrilled as I am.

P3nT4gR4m
Consultant

Artist3d said:

I was using the program to build a 3D version of 2D painting I did and
brought in a reference image to work from. Now that I have completed my
sculpture how do I get rid of the reference image that is floating
there? Thanks to anyone who knows. I thought of deleting it from the
media folder however that seems like it might create an error when I try
to reload my sculpture.

I think the In Medium program is ground-breaking both for Oculus VR and artists. It is offers a truly signature tool unique to the Oculus Rift virtual reality world  Anyone looking to build models that are more organic looking and natural, particularly for fantasy landscapes and objects must be as thrilled as I am.



Bring up reference edit mode - pull the stick down and fire your laser at the middle tab along the bottom

Select the image you want to remove - the one in your scene - not the one in the sculpt menu

Hit the green "gear" button on your tool hand and select "Delete"

This will only remove the instance you have in your live sculpt, the image is still saved in your refs folder

Unilady
Honored Guest
I dont know who to talk to i wanted to give some game thoughts of a few new games for the gear vr picoss , tripeak solitaire, and sims if u dont know what picoss is its in the google play store please and thank u this would be awesome if u can make this happen for me if u can

Anonymous
Not applicable
@Unilady This is the wrong section of the forums, Gear VR talk is here 🙂 : https://forums.oculus.com/community/categories/samsung-gear-vr

Sterling77
Rising Star
@MattHickman just a question regarding the medium folder in documents - windows 7, can this be moved to a different drive ? medium is maxxing out my puny ssd. is it something i can change in environment variables or something. cheers really keen to know 
https://forums.oculus.com/community/discussion/52965/sterlings-sketchbook

nalex66
MVP
MVP


@MattHickman just a question regarding the medium folder in documents - windows 7, can this be moved to a different drive ? medium is maxxing out my puny ssd. is it something i can change in environment variables or something. cheers really keen to know 


I have my Windows user folders (Documents, Pictures, Videos, Music, Downloads) on a different drive than my OS, and Medium uses that location without issue. I'm on Windows 10, but I'm pretty sure Windows 7 allows you to relocate user folders as well. If your SSD is getting full, you should consider moving all of that stuff. 

DK2, CV1, Go, Quest, Quest 2, Quest 3.


Try my game: Cyclops Island Demo

Sterling77
Rising Star

nalex66 said:



@MattHickman just a question regarding the medium folder in documents - windows 7, can this be moved to a different drive ? medium is maxxing out my puny ssd. is it something i can change in environment variables or something. cheers really keen to know 


I have my Windows user folders (Documents, Pictures, Videos, Music, Downloads) on a different drive than my OS, and Medium uses that location without issue. I'm on Windows 10, but I'm pretty sure Windows 7 allows you to relocate user folders as well. If your SSD is getting full, you should consider moving all of that stuff. 


Thanks @nalex66 - when you moved this how did you let Medium know where it was ?? 
https://forums.oculus.com/community/discussion/52965/sterlings-sketchbook