cancel
Showing results for 
Search instead for 
Did you mean: 

3D printable sensor mount hobby project

caseydvorak
Level 2

Hey all!



I'm one of the folks at
Oculus who has been working on Oculus tracking and roomscale support.  When
I was experimenting with different setups, I decided to start up a bit of a hobby project to create a few mounts I could use at my setup at home.



I got into 3D printing
about a year ago, and have been having a lot of fun creating some custom items
like this.  Note, these aren't Oculus products or endorsed as official
Oculus mounts, but I figured if people in the community wanted to give a shot
at printing them and adding them to their setup it could be a help.  3D printing can be difficult if you don’t have a lot of experience, so in many cases you’re better off buying official tripod mounts.  That said if you’re up to the challenge feel free to try printing these and/or modify them for your own use.  These are the items attached:



Sensor-holders

holder-corner-slim.stl - Slim version of corner sensor mount

holder-corner-standard.stl - Full rectangular version of corner sensor
mount

holder-flat-slim.stl - Slim version of flat sensor mount, for
mounting directly on a flat wall

holder-flat-standard.stl - Full rectangular version of the flat mount



Cord-guides (to keep the sensor cord against the
wall)


cordguide-corner-slim.stl - Guide which uses one screw to press the cord
against the corner of your wall

cordguide-corner-standard.stl - Guide which uses two screws to press the cord
against the corner of your wall

cordguide-flat-standard.stl - Flat guide to press your cable against a flat
wall



In case you want to try
printing, I used these print settings on my personal machine:



Material: ABS (though PLA or other materials may work)

Infill 20%

Top/bottom/side layers: 4

Speed 40mm/s



Have fun!

P.S. I ended up designing these for #2 Phillips 1" 2.54cm drywall screws.  You should be able to pick them up at a local hardware store if you don't have compatible screws already.

ysi874tlezq6.png

khteygdknvvi.jpg

29 REPLIES 29

dengel72
Level 2
Nice work!

FrozenPea
Level 13
Great design! I'll have to give them a go!
Check out my Medium Sculpts: 
https://forums.oculus.com/community/discussion/49696/frozenpeas-sketchbook

Youtube Channel: https://www.youtube.com/c/FrozenPeaSculpts

Griff0x
Level 4
printed and using, excellent work. 
Thank You.

The_Hardboiled_
Level 4
Will definitely try this out. Thank you for uploading the files!

Shadow_Fury
Level 2
That's awesome, thank you.
Excuse my ignorance, but I don't see the link to download the parts blueprints

cybereality
Level 16
Look at the bottom of the post, there are 2 zip files attached.
AMD Ryzen 7 1800X | MSI X370 Titanium | G.Skill 16GB DDR4 3200 | EVGA SuperNOVA 1000 | Corsair Hydro H110i Gigabyte RX Vega 64 x2 | Samsung 960 Evo M.2 500GB | Seagate FireCuda SSHD 2TB | Phanteks ENTHOO EVOLV

twisteklabs
Level 7
When mounting with screws, I prefer this style. nhno13kclmdx.jpg
CPU: Intel i5-4690K Mobo: ASUS Z97-AR Ram: 8GB 1600MHz Graphics Card: EVGA GTX 1080 SC

kogermax
Level 5
#twisteklabs

what design did you use?

god_alom
Level 5
Can I use really strong adhesive tape?