04-09-2021 10:29 PM
I've had a Quest 2 and the right trigger always felt off, and I finally was able to confirm that the trigger doesn't fully register a 100% press when pressed fully, despite physically pressing down just fine.
So far I've unpaired and paired it again, inserted a new battery, made sure the trigger is clean and unobstructed, the controller is completely undamaged, factory restore, etc etc. Everything support said to do in emails, but they stopped responding.
So far, nothing has worked.
With literally any other controller, I could just recalibrate it and it'll be fine, but so far, I haven't found a way to do that.
Here's a video of the raw input from the controller;
both left and right triggers are depressed the same amount, but the right one isn't registering as 100%Solved! Go to Solution.
06-29-2023 07:25 AM
Hey guys! Just wanting to drop in here. If your trigger's only being read at about 85% power, I'd recommend unpairing and repairing your controllers.
If that doesn't help out, you might want to try and PM @MetaQuestSupport so they can check some other things out.
04-11-2021 07:58 AM
What program are you using for that. Having issues with mumybleft thumbstick. Is it steam?
04-12-2021 06:51 PM
It's called Oculus Monitor
https://github.com/rajetic/OculusMonitor
Run the program, then link your headset to your PC. Once it connects, it should display your inputs and movements.
04-13-2021 01:42 PM
This probably won't help, but you can try holding it pressed all the way down for a few seconds and a few times in a row. You may have already tried that though. If you are able to launch SteamVR (by allowing unknown apps or whatever), they have a calibration UI where I saw a similar trigger problem clear up after playing around and pressing it like I described.
11-23-2021 12:58 PM
Did you manage to fix this? How can I run OculusMonitor?
02-16-2022 11:54 PM
In appdata/local/TouchCalibration there are 2 files, .rtouch and .ltouch you can edit to calibrate. Still don't know well what the values mean, I'll se with your app.
07-25-2022 12:09 PM
The same issue, is there any news about it?
07-29-2022 07:50 AM
Hello there! We understand you have some issues calibrating your controllers. Your time is very important to us and we'll be happy to guide you today!
You can increase the dead zones of the controller by following these steps:
When powering on your controllers, ensure that the Analog sticks aren't being held in any direction and are at rest in the neutral position.
Please let us know if this helps.
07-30-2022 11:33 AM
Hello vaym.skl!
We hope you're having a good Saturday. We wanted to check in with you!
Are you still having issues with your trigger button on your controller? Did the tips we provided help you out?
If you're having issues still we're here to help, don't hesitate!
08-04-2022 03:05 AM - edited 08-04-2022 03:07 AM
Hello,
Thank you for responding.
Analog sticks work just fine (Topicstarter mentioned it too). The problem is that the trigger doesn't fully register a 100% press when pressed fully, despite physically pressing down just fine. And there is no way to calibrate it.