cancel
Showing results for 
Search instead for 
Did you mean: 

Extension for Oculus sensor

Zandil
Rising Star
Hey guys, I'm after a 30cm high extension for one of my Sensor stands, basically a extension rod that will screw in to the existing setup to bring my sensor up to the height I need,  at least 30 cm and can get it in Australia. 
If any one knows or has used something that will suffice ?
5 REPLIES 5

cybereality
Grand Champion
This is what I use. You can clamp it to a desk, or a shelf, etc.
https://www.amazon.com/Smatree-Ajustable-Gooseneck-Extension-Session/dp/B00MWNYGUS/
Smatree Ajustable Jaws Flex Clamp Mount 13.4"
AMD Ryzen 7 1800X | MSI X370 Titanium | G.Skill 16GB DDR4 3200 | EVGA SuperNOVA 1000 | Corsair Hydro H110i Gigabyte RX Vega 64 x2 | Samsung 960 Evo M.2 500GB | Seagate FireCuda SSHD 2TB | Phanteks ENTHOO EVOLV

skantron
Explorer
I used these they are 16 inches (40cm) but they did the trick.  What you can look for are tripod extensions, and have 1/4-20" threads (the common tripod connector size for camera gear).  I used a security camera wall mount and these to get my sensors on the wall.  https://www.amazon.com/gp/product/B009OMPVQI/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 ;

Zandil
Rising Star
Thanks @cybereality but the clamp is not able to be used where the sensor is but I did look into those.   @skantron that's what I was after but need to check if they ship to Oz and uf they do don't charge me 5 times the amount of the product for shipping.

skantron
Explorer
Sorry, I have no idea what shipping or availability to Australia is like, but hopefully, if you can search for 1/4-20 threaded extension rod with local camera shops or sites (or places that sell security camera gear), you might be able to find something local to you.  Good Luck!

Sinstalker21
Heroic Explorer
Amazon is your friend...I think.